Philips Ingenia 3.0T Magnetic Resonance System,the first-ever digital broadband MR
PHILIPS MRI RF AMPLIFIER 3.0T AN8134 P/N: 452213203182
Xtend Magnet System |
|
| Magnet weight | 4600 kg |
| Open bore diameter | 70 cm |
| Maximum FOV | 55 cm |
| Typical homogeneity at 45 cm DSV | ≤ 1.1 ppm |
| HeliumSave technology | (Zero boil-off) Yes |
| Cryogen boil-off rate under regular scanning conditions | 0 l/hr |
Omega HP gradients |
|
| Max. amplitude for each axis | 45 mT/m |
| Max. slew rate for each axis | 200 T/m/s |
Resolution parameters |
|
| Max scan matrix | 1024 (2048 optional) |
| Max. number of slices | 1024 |
| Highest in-plane resolution | 5 µm |
RF Transmit |
|
| Parallel RF transmission | Yes |
| Number of independent RF amplifiers | 2 AN8134 |
| Output power | 2 × 18 kW |
dStream RF receive |
|
| Number of independent receive channels | Channel independent |
| Location of analog-to-digital converter (ADC) | Inside the coil |
| Signal chain from coil to reconstructor | Fully digital |
| Signal chain from coil electronics to connector | Digital |
| Signal chain from connector to magnet | Digital |
| Signal chain from magnet to reconstructor | Digital |
Patient environment |
|
| Patient aperture | 70 cm |
| Flare on both ends | Yes |
| Tunnel diameter at both ends | 95 cm |
| Maximum weight capacity | 250 kg (550 lbs) |
| Patient transport system (optional) | FlexTrak |
| Wireless patient physiological synchronization | Yes |
| Various acoustic noise reduction solutions | Yes |
Site Planning |
|
| Total gantry installed weight | ≤ 5800 kg |
| Minimum siting requirement | 30 m² |
dStream workflow |
|
| FlexCoverage Posterior coil | Yes |
| FlexCoverage Anterior coils (optional) | Yes |
| FlexConnect connectors | Yes |
| FlexTrak tabletop | Yes |
| FlexCaddy coil storage (optional) | Yes |
| FlexTrak patient transport system (optional) | Yes |
| FlexTrak Mammo mammography solution (optional) | Yes |
iPatient efficiency assistance |
|
| SmartStart | Yes |
| SmartSelect | Yes |
| SmartExam (optional) | Yes |
| SmartLine (package dependent) | Yes |
| SmartLink (package dependent) | Yes |